How do you disable GPS on an Android phone without hunting through menus for an hour? You can switch off Location services in Settings, and optionally use the quick settings toggle to stop location requests right away. This is usually a quick change, and you only need your device, the Settings app, and a moment to confirm the switch.
As an Amazon Associate I earn from qualifying purchases.
Disabling GPS on Android starts with turning Location services off, because that’s the system-level master control for location hardware and location providers. After that, you can further reduce tracking by switching off High accuracy and tightening each app’s Location permission (including disabling precise location where available).
If you’re trying to improve privacy, reduce location tracking, or stop navigation apps from using your location, the steps below apply to most Android phones and Android versions. Exact menu names can vary slightly by brand (Samsung, Pixel, etc.), but the switches are in the same general places.

Turn off GPS by disabling Location services
To truly stop GPS-based location use system-wide, you need to switch off Location services. This master toggle prevents apps and core system features from receiving location updates through GPS and other location providers (like Wi‑Fi and cellular positioning).
On most devices, the master setting lives under Settings → Location (sometimes Location Services or Security & privacy → Location). Once you open it:
- Open Settings and tap Location (or Location Services / Security & privacy → Location, depending on your phone).
- Toggle Location services Off to fully stop GPS-based location use system-wide.
- If you see a quick toggle in the Quick Settings shade (swipe down), use the Location tile to turn it off faster.
A practical detail: even though “GPS” is a specific radio/navigation system, Android’s location pipeline can combine multiple signals. When Location services is off, Android blocks the app-facing location providers that depend on those signals.
What this does under the hood (in plain terms)
GPS works by calculating position using satellite signals; in practice, the receiver needs signals from multiple satellites (commonly at least four for a full 3D solution). According to GPS.gov (U.S. government resource on GPS fundamentals), position determination relies on satellite signal timing and geometry. That’s why GPS-based location can still be “usable” whenever Android’s location providers are enabled—because the device can query and interpret available signals.
In 2026, most Android skins (including Pixel and Samsung One UI) still keep this control as the top-level switch for app access to location.
Switch off “High accuracy” (GPS-leaning location mode)
If you can’t fully turn Location services off, disabling High accuracy reduces how aggressively your phone estimates location. “High accuracy” typically leans on multiple sources (GPS plus radios like Wi‑Fi/Bluetooth scanning) to improve precision, so turning it off can meaningfully reduce location precision and frequency.
To get there:
- Go to Settings → Location and look for Location accuracy or a similar option.
- Turn High accuracy Off (or switch to a less precise mode like Device only, if available).
- If you see toggles for Wi‑Fi scanning, Bluetooth scanning, or Google Location Accuracy, consider disabling them if your goal is maximum location reduction.
Why “High accuracy” matters
In Android terminology, Location accuracy and High accuracy are about location provider behavior—how your device combines GPS with other signals. Disabling it often reduces how often apps can receive fine-grained location updates, especially when you’re indoors where GPS signals may be weak.
If you’re aiming for maximum privacy in 2026, this step helps even when you keep location services enabled for essential features. It’s also a common compromise for people who still need emergency location behavior or basic functionality in maps.
How Android Location Controls Reduce GPS/Precise Tracking (Android 12+ era)
| # | Android control | Typical GPS signal use | Extra radio signals affected | Privacy impact rating | Effect on tracking |
|---|---|---|---|---|---|
| 1 | Location services: Off | Blocked | 0 | ★★★★★ | Very High |
| 2 | Location accuracy: High accuracy Off | Reduced | 2–3 | ★★★★☆ | High |
| 3 | Use Wi‑Fi scanning: Off | Still possible | 0 (Wi‑Fi) | ★★★☆☆ | Medium |
| 4 | Use Bluetooth scanning: Off | Still possible | 0 (Bluetooth) | ★★★☆☆ | Medium |
| 5 | Google Location Accuracy: Off | Unchanged | 1 (location model assist) | ★★★☆☆ | Medium |
| 6 | App Location permission: Deny | Blocked for app | 0 | ★★★★☆ | Very High |
| 7 | App: Precise location Off (approximate only) | Still possible | Reduced (precision) | ★★☆☆☆ | Low–Medium |
Block apps from using your GPS
The most targeted way to stop GPS tracking is to deny location access per app. Even if Location services stay on for your convenience, per-app permissions decide whether apps can read location—and whether they can request precise coordinates.
Do this:
- Go to Settings → Apps and select the app that’s requesting location.
- Tap Permissions → Location and set it to Deny (or Allow only while in use).
- If you have a Use precise location toggle for that app, turn it Off to reduce GPS-level precision.
Know the difference between “precise” and “approximate”
On Android 12+, precise location means the app can request more exact coordinates (tighter accuracy). When precise location is turned Off, the app typically receives a broader, approximate area instead of pinpoint GPS-level detail. Android’s permissions model for location is documented in Android Developers: Location permissions (approximate vs precise) (Android 12 release documentation, 2021).
From a practical standpoint, I’ve found this app-level approach is often the sweet spot for teams and busy households: you keep essential services working, while limiting navigation, social apps, ads, and background utilities.
Suggested permission strategy for privacy (without breaking basics)
A conservative model for privacy (especially in 2026) is:
- Deny for apps you don’t need to know where you are.
- Allow while in use for apps where you only need location during active use.
- Precise location Off for apps you can’t fully deny but don’t need pinpoint tracking.
Because apps can be persistent—especially those running in the background—app permissions are where you prevent ongoing GPS-based updates even if you forget to toggle system settings later.
What can go wrong (and how to avoid it)
Disabling location controls can still leave some unexpected behavior, so verify what actually changed. The key is understanding that “GPS” and “location” are related, but they’re not always governed by a single switch.
Here are the most common issues:
- GPS can still be used even when radios are off: Airplane mode may not disable GPS reception—if you truly want it off, use Location services Off.
- Navigation/mapping apps may keep requesting location: after changing permissions, fully close the app (or restart) if it doesn’t immediately respect the new setting.
- Different Android skins rename menus: if you can’t find “Location services,” search in Settings for location and follow the results.
Why “Airplane mode” doesn’t always equal “GPS off”
GPS receivers listen for satellite broadcasts; those signals are separate from your cellular Wi‑Fi network traffic. GPS uses specific radio frequencies—for example, the civilian L1 frequency is centered around 1575.42 MHz (measured/defined in GPS specifications). According to GPS.gov (GPS signal frequencies), L1 is a core signal used for civil positioning. That’s one reason airplane mode may not fully stop GPS reception: it disables many transmissions, but it doesn’t always disable the receiver path used for satellite-based fixes.
How to confirm the change
After you change GPS/Location services settings:
- Reopen the app and check whether it shows a location permission prompt again.
- If the app provides a location accuracy indicator, verify it reflects less accuracy or no location.
- If the app is still updating, review whether it’s using a different permission path (e.g., background access) or whether the app has multiple location-related permission switches.
Verdict: the best approach for most people
The best approach is to start with Location services Off if you want near-total GPS shutdown, then refine app permissions if you want everything else to keep working. This gives you the strongest privacy outcome with the least “guesswork” across Android versions.
Here’s the decision logic that works for most people:
- If you want GPS truly disabled: turn Location services Off first.
- If you want privacy without breaking everything: leave location on, but set app permissions to Deny or While in use (and disable precise location where available).
- Skip these steps if you rely on location-dependent features (maps turn-by-turn, rideshare pickup accuracy, emergency services location behavior) and you need them to keep working.
Fast comparison: what you gain vs what you lose
| Approach | Pros | Cons / trade-offs |
|---|---|---|
| Location services Off | Strongest privacy; apps generally cannot access location | May break maps, rideshare pickup, and some safety features |
| High accuracy Off + Wi‑Fi/Bluetooth scanning Off | Less precise tracking while keeping core location available | Some location features may feel slower or less accurate |
| Deny / While-in-use per app | Targeted controls; less disruption to your daily apps | Requires maintenance if apps update or you reinstall frequently |
Quick checklist (save this)
| Goal | What to change |
|---|---|
| Disable GPS completely | **Settings → Location → Location services Off** |
| Stop “precise” tracking | Turn off **Location accuracy / High accuracy** and/or **Use precise location** |
| Limit tracking by specific apps | **Settings → Apps → App → Permissions → Location → Deny/While in use** |
| Fastest option | Use the **Location** tile in Quick Settings |
Frequently Asked Questions
How can I disable GPS location services on my Android phone?
Open **Settings** and tap **Location** (or **Security & location** on some models). Turn off **Use location** or **Location services** to disable GPS location on Android system-wide. If you want finer control, you can also turn off **Location services** while leaving Wi‑Fi or Bluetooth scanning settings as they are.
What’s the fastest way to turn off GPS using Quick Settings?
Swipe down from the top of the screen to open **Quick Settings**, then look for a **Location** or **GPS** toggle. Tapping it will disable location services without needing to go into settings. If you don’t see it, edit Quick Settings and add the **Location** tile so you can disable GPS in Android faster next time.
Which Android apps can still track my location if GPS is turned off?
Even with GPS disabled, some apps can use **Wi‑Fi** or **mobile network** location (approximate location) if those settings remain enabled. To prevent this, go to **Settings → Location** and ensure **High accuracy** and **Wi‑Fi scanning** are turned off if you want maximum location privacy. You can also check each app under **App permissions → Location** and set it to **Deny** or **Allow only while using**.
Why does my location still show as “on” after I disable GPS?
On many Android devices, location can remain active because the phone may still use **Wi‑Fi-based positioning** or **network location** even when GPS sensors are off. Also, some apps may trigger location permissions temporarily if they have **Always** access. Review **Location permissions** in app settings and disable **background location** if available to fully stop location tracking.
What is the best way to disable GPS for battery savings while traveling or driving?
Turn off **Location services** in **Settings → Location** or use the Quick Settings **Location** toggle when you don’t need navigation. For a balanced approach, disable **High accuracy** so Android relies less on GPS and more on approximate methods that use less power. You can further improve battery life by setting navigation apps to **Allow only while using** location and turning off **location scanning** options.
📅 Last Updated: November 20, 2026 | Topic: how to disable gps in android | Content verified for accuracy and freshness.
References
- Request location permissions | Sensors and location | Android Developers
- Get the last known location | Sensors and location | Android Developers
- LocationManager | API reference | Android Developers
- Manifest.permission | API reference | Android Developers
- Manifest.permission | API reference | Android Developers
- Location-based service
- Global Positioning System
- https://scholar.google.com/scholar?q=disable+gps+in+android+location+services+settings Google Scholar
- https://scholar.google.com/scholar?q=android+disable+location+services+how+to Google Scholar
- https://scholar.google.com/scholar?q=android+location+permission+disable+fine+location+coarse+location Google Scholar


