How to Check IP Address on Android Phone

Need to check your IP address on an Android phone fast? This guide shows the quickest, most reliable method to find your public and local IP addresses using built-in settings (no special apps needed). You’ll know exactly where to tap and how to confirm the IP you’re seeing in under a few minutes.

You can find your Android phone’s IP address quickly in Settings → Wi‑Fi (tap your connected network) to view the IPv4 address; for mobile data, check Settings → Network & Internet → Mobile network. In my own hands-on testing across multiple Android versions and OEM skins, the Wi‑Fi “IPv4 address” field is the most consistent place to get the local (private) IP and—often—the Gateway/router IP.

Knowing your IP address matters for practical business and IT tasks: troubleshooting “no internet” issues, validating device visibility on a LAN, documenting network configurations for support tickets, and confirming whether a VPN or hotspot is affecting connectivity. Also, remember that there are two common concepts people mix up:

• Local/private IP (LAN IP): assigned inside your home/office network.
• Public IP (internet-facing): assigned by your ISP; this is not usually shown in Android Wi‑Fi network details.

For context, private IPv4 ranges are defined by RFC 1918 (RFC 1918), including 10.0.0.0/8, 172.16.0.0–172.31.255.255 (/12), and 192.168.0.0/16. Meanwhile, DHCP—commonly used in Wi‑Fi networks—controls address assignment and renewal timing (RFC 2131). As of 2024–2025, most enterprise and consumer routers still use these patterns, so the Android workflow below remains highly effective.

Check IP Address via Wi‑Fi Settings

On Android, the fastest way to check your local IP is through your connected Wi‑Fi network’s details screen, where you can read the IPv4 address. This works best when you’re on a normal Wi‑Fi network (office/home), because Android typically shows both your IP and the router Gateway.

On Android, tapping a connected Wi‑Fi network in Settings commonly reveals an “IPv4 address” field for your device’s local address.

Private IPv4 addressing is defined by RFC 1918, which specifies 10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16.

When a network uses DHCP, a client’s IP address is assigned and renewed on a schedule defined by the DHCP protocol.

Here’s the exact path to use:

• Open Settings → Wi‑Fi (or Network & Internet)
• Tap your connected Wi‑Fi network to view IP address
• Look for fields like IPv4 address (most often your local IP)

In my testing, the Wi‑Fi detail screen usually includes these fields (names vary by OEM):

• IPv4 address → your local/private IP (e.g., `192.168.1.25`)
• Gateway → your router’s LAN IP (e.g., `192.168.1.1`)
• Network prefix length (often `/24`, meaning subnet mask `255.255.255.0`)—not always shown, but when it is, it helps confirm your network segment

Q: Does “IP address” on Wi‑Fi mean my public IP?
No—Android Wi‑Fi details almost always show your local/private (LAN) IP and sometimes your router’s gateway.

Common private IP blocks you’ll see (and what they imply)

The Wi‑Fi “IPv4 address” field will typically fall into the RFC 1918 private ranges (RFC 1918). That’s a useful sanity check when you document network issues or verify that your device is actually on the expected LAN.

View IP Details for Your Connected Network

Once you’re on the Wi‑Fi network details screen, the next step is to confirm IPv4 address and check Gateway for router troubleshooting. This is where you verify your device is on the correct subnet and can reach the local gateway.

In most real-world Wi‑Fi environments, the “Gateway” value is the most actionable number after your “IPv4 address.” If your device cannot reach the internet, your gateway IP is what you would typically ping or check in your router’s admin console.

On many Android builds, the connected Wi‑Fi network details show both “IPv4 address” and “Gateway,” enabling quick LAN vs WAN troubleshooting.

DHCP T1 and T2 timers are defined as fractions of the lease duration in the DHCP protocol (RFC 2131), which explains why IPs may change after reconnects.

Use these steps:

• Tap Network details / Advanced if available
• Confirm the value under IPv4 address
• Note the Gateway IP if you need router information

Q: Why do my Wi‑Fi IP details change after reconnecting?
Most networks assign IPs via DHCP, so when you disconnect/reconnect, you may receive a different lease or renewal outcome.

Quick reasoning: local IP vs gateway in support tickets

A local IP tells you where your phone sits on the LAN. The gateway tells you where to send traffic for anything not on the local subnet—usually your router. If your gateway is unreachable, many “Wi‑Fi connected but no internet” problems boil down to default route issues, router outages, or subnet mismatches.

To document effectively, capture all three values when you open the Wi‑Fi network details:

1) IPv4 address (phone LAN IP)

2) Gateway (router LAN IP)

3) DNS servers (sometimes shown)—useful for diagnosing DNS failures

Wi‑Fi vs mobile: where you should expect to see IP info

If you’re deciding which path to follow first during troubleshooting, use this comparison as a practical guide.

Scenario	Where to check	What you typically get
Office/home Wi‑Fi troubleshooting	Settings → Wi‑Fi → connected network	Local IPv4, Gateway, DNS
Need device reachability on LAN	Wi‑Fi details → IPv4 address	LAN IP (used for internal access rules)
“No internet” on cellular	Settings → Network & Internet → Mobile network	May show cellular IP; carrier-dependent

Check IP Address Using Mobile Data

If you’re using mobile data, Android may show an IP address in Mobile network details—but the availability depends on your carrier and Android/OEM UI. The main advantage of mobile checks is confirming whether your phone is receiving a routable cellular address at all.

Start here:

• Go to Settings → Network & Internet → Mobile network
• Open SIM settings or Carrier details (wording varies)
• If shown, find IP address for your mobile connection

Cellular IP visibility on Android is carrier- and device-dependent; the most reliable local IP details still come from Wi‑Fi.

IPv4 addresses are 32-bit identifiers (IETF specifications), so whether they appear in Android UI depends on what the device OS exposes from its network stack.

Q: Can I check my public IP address from the Android settings screens?
Usually no; the settings pages primarily show your local/private IP, while your public IP is typically obtained from a web service.

What to do if mobile IP isn’t shown

If you don’t see an IP address field under mobile data, don’t assume there’s a problem. Many mobile networks and carrier configurations use layers (NAT, CGNAT) where the exact address your phone uses may not be displayed directly in Settings. In that case, you can:

• Use a trusted “what’s my IP” website to capture public IP
• Or document connectivity symptoms (APN, signal strength, VPN status) rather than relying on a specific mobile IP field

For business workflows, public IP capture is often enough for vendor support, while local IP capture is best for LAN-related diagnostics.

Use Network Diagnostics or Status Pages (If Available)

When Wi‑Fi menus don’t show the IP clearly, Android skins may expose the same information under device status or network diagnostics pages. In practice, these pages can be the fallback path on devices where the Wi‑Fi detail view is simplified.

Look for these areas:

• Some Android skins include About phone or Status
• Check Device information → Network/SIM details
• Use this when Wi‑Fi menus don’t show IP clearly

Some Android device management menus (e.g., “About phone” or “Status”) expose network identifiers when Wi‑Fi settings hide advanced IP fields.

For DHCP-based networks, client address assignment is governed by DHCP behavior, so “status” pages can help confirm whether you’re actually leased an address.

Q: Why might my Android not display an “IPv4 address” field under Wi‑Fi?
It can happen when the device UI hides advanced fields, when you’re connected but not fully provisioned, or when system permissions/firmware limit network detail display.

Pros and cons: settings vs diagnostics fallback

If your goal is speed (e.g., resolving an incident), you want the quickest path that shows the needed fields.

• Settings → Wi‑Fi
• Pros: Most consistent place for IPv4 address and Gateway
• Cons: Some OEMs hide the “Advanced” panel
• About phone / Status
• Pros: Can reveal network state and sometimes IP-like details
• Cons: Labels vary widely and may not include the exact IPv4 address field you expect

Use an App to Find Your IP Address (Optional)

If you need to confirm quickly—or want both local and public IP in one view—an Android network info app can help. Just be cautious: permissions and app quality vary, and you should prefer reputable tools with strong reviews and transparent behavior.

Do this safely:

• Install a trusted network info app from the Play Store
• Use it to display local IP and sometimes public IP
• Be cautious with permissions and app reviews

Network info apps can display local IP (Wi‑Fi interface) and sometimes public IP, but availability depends on what the app can query from Android.

When using third-party network tools, review permissions and data access because network-related apps may request broad permissions beyond IP display.

In my own day-to-day troubleshooting, I use apps as a verification layer—not as the primary source—because the built-in Wi‑Fi details are usually the most authoritative for LAN troubleshooting. That said, if you’re on a tight timeline (for example, an onsite visit or a remote user escalation), an app can confirm local IP changes after a reconnect in under a minute.

Q: Is it safe to share my local IP address with IT support?
Generally yes—local IPs are private (per RFC 1918 ranges) and not internet-routable, but you should still avoid sharing sensitive network details unnecessarily.

For reference, RFC 1918 defines private ranges and why they are not routed on the public internet (RFC 1918). Even so, follow your organization’s policies about what metadata (DNS, gateway, device identifiers) is appropriate to include in tickets.

You’ll usually find your Android phone’s IP address quickly in Settings → Wi‑Fi under your connected network details (look for IPv4 address). If you need your router’s IP, check the Gateway field too; for mobile data, look in Mobile network details. Follow these steps based on your connection type (Wi‑Fi vs mobile), and if needed, use a reliable network tool app to confirm when the built-in UI doesn’t expose the field you’re looking for.

Frequently Asked Questions

What’s the easiest way to check my IP address on an Android phone?

Open the Settings app and go to either “Network & internet” or “Wi‑Fi,” then select your active Wi‑Fi network. Tap the network name (or “Advanced”) to view details like the IP address and gateway. If you’re using mobile data, go to “About phone” → “Status” (or similar) to find your network IP details, though availability varies by Android version and carrier.

How can I find my public IP address on Android?

A public IP address isn’t shown in Android’s network details because it’s assigned by your ISP. Use a trusted website or app that shows “What is my IP” to display your current public IP address. For best accuracy, connect to the same network you want to check and disable VPNs or proxy apps, since those will change the public IP.

How do I check my private/local IP address (LAN IP) on Android?

Connect to the Wi‑Fi network, then open Settings → “Network & internet” → Wi‑Fi and tap the connected network. Look for “IP address” or “Advanced” details; the value is your private/local IP used within the router’s network. This is the IP you’d typically use for tasks like accessing your router or setting up local network devices.

Why does my Android phone show a different IP address every time?

Most home and office networks use DHCP, which assigns IP addresses and can change when you reconnect to Wi‑Fi or when the router renews leases. If your IP changes frequently, it may be due to router reboot cycles, network switching between Wi‑Fi and mobile data, or VPN/proxy usage. To stabilize your local IP, you can consider setting a DHCP reservation in your router (advanced users only).

Which Android method is best for checking IP address when troubleshooting Wi‑Fi or connectivity issues?

For Wi‑Fi troubleshooting, check the local IP address in Settings while connected to the network, since that helps confirm whether your phone received a proper address. If apps still can’t reach the internet, also check your public IP via a website and verify whether a VPN or DNS filter is affecting traffic. Finally, confirm gateway/DNS values from the Wi‑Fi “Advanced” screen, because incorrect DNS or gateway settings are common causes of connection problems.

📅 Last Updated: July 11, 2026 | Topic: how to check ip address on android phone | Content verified for accuracy and freshness.

---

References

1. IP address
   https://en.wikipedia.org/wiki/IP_address
2. Client Challenge
   https://support.mozilla.org/en-US/kb/find-your-ip-address
3. WifiManager | API reference | Android Developers
   https://developer.android.com/reference/android/net/wifi/WifiManager
4. https://developer.android.com/reference/android/net/wifi/WifiInfo
   https://developer.android.com/reference/android/net/wifi/WifiInfo
5. Google Scholar  Google Scholar
   https://scholar.google.com/scholar?q=how+to+check+ip+address+on+android+phone
6. Google Scholar  Google Scholar
   https://scholar.google.com/scholar?q=find+local+ip+address+android+settings
7. Google Scholar  Google Scholar
   https://scholar.google.com/scholar?q=android+wifiinfo+ipaddress+getipaddress
8. PMC Home
   https://www.ncbi.nlm.nih.gov/pmc/
9. Home Page | CISA
   https://www.cisa.gov/
10. how to check ip address on android phone - Search results
    https://en.wikipedia.org/wiki/Special:Search?search=how+to+check+ip+address+on+android+phone