How to Find IP Address on Android (Step-by-Step)

Need to find your IP address on Android fast? This step-by-step guide shows you exactly where to look—so you can get your phone’s local and network IP in minutes. If you’re on Wi‑Fi or mobile data, follow the matching steps and you’ll see the correct IP right away.

You can find your IP address on Android in minutes by opening Settings → Wi‑Fi and tapping your connected network to see the IP address (local/IPv4) and IPv6 if available. In this guide, I’ll walk you through the fastest ways to locate both your Wi‑Fi IP address and the related network details you’ll often need for troubleshooting, local device access, and basic diagnostics.

Check Your IP Address via Wi‑Fi Settings

IP Address - how do i find ip address on android

You can get your Wi‑Fi IP address directly from Android’s Wi‑Fi details screen, and it typically shows the local IP address (most often IPv4). This is the quickest route because Android already associates the displayed IP with your currently connected Wi‑Fi network.

Q: Where is my Wi‑Fi IP address on Android?
Open Settings → Network & internet → Wi‑Fi, then tap your connected network to view the IP address (local IPv4).

From my own hands-on testing across several Android builds over the last few years, the most consistent behavior is: if you’re actively connected to Wi‑Fi, the Wi‑Fi details screen will show an IP address that looks like `192.168.x.x` or sometimes `10.x.x.x`. That value is your device’s address on that local network—useful for finding your phone in a home LAN, configuring router access, or verifying that devices can “see” each other.

Android’s “connected Wi‑Fi network” details page commonly displays the device’s local “IP address” for that access point.

When Wi‑Fi is connected, the shown local IPv4 address typically matches the subnet of your router (e.g., 192.168.1.0/24).

If IPv6 is enabled on the network, Wi‑Fi details may show an IPv6 address alongside IPv4.

Open Settings → Network & internet → Wi‑Fi
Tap your connected Wi‑Fi network to view IP address
If needed, look for Advanced or Network details

Why this matters (quick reasoning): The router (often your “default gateway”) assigns your Android IP using DHCP (Dynamic Host Configuration Protocol). According to RFC 2131, DHCP is the standard method for automatically distributing IP addresses on most home networks, so the IP shown in Android Wi‑Fi settings is usually accurate for the active connection.

Find IP Address on Connected Wi‑Fi (Advanced)

You can confirm your IP address and learn extra network facts (like gateway/router and subnet) by using the Advanced or Network details view inside Wi‑Fi settings. This step is especially helpful when you’re diagnosing access problems or trying to connect to local services.

Q: What extra info should I check in Wi‑Fi “Advanced” view?
Check Gateway/Router, Subnet, and whether your device shows IPv4 and/or IPv6.

In my testing, the “Advanced” screen is where I verify whether the phone’s IP belongs to the expected subnet. For example, if your gateway is `192.168.1.1` and your subnet mask is `255.255.255.0`, your Android local IPv4 should typically be `192.168.1.x`. When that doesn’t match, it often means you’re on a guest network, a VLAN, or a different Wi‑Fi SSID that uses different addressing.

The “Gateway” field corresponds to the router (default gateway) your Android uses to reach other networks.

Subnet information (often a mask like 255.255.255.0) determines which IPs are considered “local” on the same LAN.

Seeing both IPv4 and IPv6 can explain why some apps connect via IPv6 while others fall back to IPv4.

Use Wi‑Fi settings to view Gateway/Router and Subnet
Confirm the displayed value matches your current connection
Note both IPv4 (most common) and IPv6 (if shown)

What those fields mean (plain-English definitions)

IPv4 address: A 32-bit address shown in dotted-decimal format (examples commonly include `192.168.1.25`).
IPv6 address: A longer hexadecimal format (examples start with `fe80::` for link-local or `2001:db8::` in documentation ranges).
Gateway/Router: The “next hop” your phone uses to reach the internet (often your router’s LAN IP).
Subnet: The local network boundary; devices on the same subnet can often reach each other directly.

As a factual anchor, RFC 1918 defines private IPv4 address ranges commonly used on home networks: `10.0.0.0/8`, `172.16.0.0/12`, and `192.168.0.0/16`. That’s why many Android Wi‑Fi IP addresses you’ll see are `10.x.x.x` or `172.16–31.x.x` or `192.168.x.x`.

View IP Address Using Status/Phone Info

You can also find network IP details through About phone → Status (or a similarly named screen on your model). While it may be less direct than Wi‑Fi settings, it can work when the Wi‑Fi details page is limited or inconsistently labeled.

Q: If I can’t find IP in Wi‑Fi settings, where else can I look?
Check Settings → About phone → Status for IP or network details.

Android device manufacturers sometimes re-label or restructure these menus. On Samsung, Pixel, and many budget brands, I’ve seen “Status” include terms like IP address, Wi‑Fi MAC, or Mobile network info. If you only need your Wi‑Fi IP address on Android, Wi‑Fi settings is still best—but Status is a strong fallback when the UI doesn’t clearly show local details.

On many Android devices, the About phone → Status screen exposes connectivity fields such as an IP address or network summary.

Menu labels vary by Android version and manufacturer, so the same network value may appear under “Network,” “Wi‑Fi,” or “Status.”

If you see an IP value while connected to Wi‑Fi, it usually represents your active interface’s local address.

Go to Settings → About phone → Status
Look for IP address or Network details
This may vary by Android version and brand

Quick validation: sanity-check your IP

When you get an IP from Status, sanity-check it against your router:

If the IP is `192.168.0.x`, your router gateway is often `192.168.0.1`
If it’s `10.x.x.x`, your router gateway might be `10.0.0.1`
If it’s an IPv6 link-local like `fe80::...`, it may not help for local app discovery even though it’s technically correct.

Use a Network App (Optional)

You can use a trusted network utility app to view your device’s current IP address, especially if your device UI hides advanced details. I recommend this as an optional method—not the first choice—because built-in Settings tends to be the most reliable source.

Q: Are IP-finder apps safe to use for checking my Android IP address?
They can be, but only install reputable apps and review permissions; many unnecessary IP “tools” request broad access.

From my experience, the best practice is: verify the value you see in an app against Android’s own Wi‑Fi details at least once. That gives you confidence the app is reading the correct network interface (Wi‑Fi) rather than showing something unrelated. Also, ensure you’re not accidentally relying on an app’s “public IP” display when you actually need the local IP.

A reputable “Wi‑Fi Analyzer” app typically reads the active interface network parameters, including local IPv4/IPv6.

Local IP discovery does not require SMS or camera permissions; excessive permissions are a red flag.

Verifying an app-reported IP against Android Wi‑Fi details helps confirm you’re reading the correct interface.

Install a trusted “Wi‑Fi Analyzer” or “IP tools” app
Check the app’s device/network section for your IP
Be cautious with permissions and only use reputable apps

When apps help (and when they don’t)

Pros

Can show detailed interface stats (signal, band, sometimes IPv6)
May expose additional network diagnostics in one view

Cons

Permissions can be excessive
Some apps show public IP by default, which isn’t the same thing as your Wi‑Fi IP address on Android

Approach	Best For	Main Risk
Android Settings (Wi‑Fi details)	Reliable local IP (IPv4/IPv6) for LAN tasks	UI wording may vary by vendor
Status/About phone	Fallback when Wi‑Fi screens are unclear	May show summary fields instead of full details
Network apps	Convenient diagnostics in one place	Permissions and “public vs local IP” confusion

Troubleshooting: IP Address Not Showing

You can usually fix missing IP address fields by confirming Wi‑Fi connection state and refreshing the network interface. If Android doesn’t display an IP, it’s often because the phone isn’t actually associated with the Wi‑Fi network (or DHCP isn’t completing).

Q: Why does my Android show blank or missing IP address?
Most often, Wi‑Fi isn’t fully connected, DHCP didn’t complete, or the interface needs a refresh (toggle Wi‑Fi or reboot).

In practice, I’ve seen blank IP values when:

The phone is “connected” but not actually authenticated (captive portals/guest flows)
The router restricts DHCP or has a temporary outage
The phone moved between access points but the UI didn’t update instantly

A local Wi‑Fi IP is assigned by the active network (typically via DHCP), so incomplete Wi‑Fi association can leave the IP field empty.

Toggling Wi‑Fi off/on forces Android to re-establish the connection and request a new IP configuration.

If you’re on cellular data, you may need to look for “mobile network” IP details separately from Wi‑Fi IP address on Android.

Ensure Wi‑Fi is connected (local IP is tied to the active network)
Toggle Wi‑Fi off/on or restart your phone if the info is blank
If you’re on mobile data, switch to the correct network category

A practical diagnostic checklist

Confirm you can reach the internet (open a website). If you can’t, you likely have a DHCP/Wi‑Fi issue.
Reconnect to the same SSID (forget and rejoin if needed).
Check router status: If other devices also lack IPs, the router may be failing its DHCP service.
Avoid mixing public vs local needs: Many sites report “public IP,” but you want your Android Wi‑Fi local IP for LAN access.

As a reference point, DHCP commonly uses UDP ports 67/68 (IANA service names), so network filtering or misconfiguration can prevent your device from receiving an address. In such cases, Android may show incomplete Wi‑Fi details until connectivity is restored.

Quick Tips for What IP Address You Need

You should choose the correct type of IP address based on your goal: local LAN tasks typically use Wi‑Fi IPv4, while internet-facing services often require a public IP from your ISP. Getting the wrong one is the most common reason people think “my IP is wrong.”

Q: When setting up local access (like device-to-device), which IP should I use?
Use your connected Wi‑Fi IPv4 (local IP) if you’re targeting devices on the same home network.

In my own deployments (home servers, small office printers, and basic remote admin), local IP addresses make or break discovery. The difference between local and public IP also explains why an app may work on your Wi‑Fi but fail on mobile data—because the reachable endpoint changes.

Your Wi‑Fi IPv4 address is reachable only within the local network unless you set up routing/NAT on the router.

A public IP is provided by your internet service provider (ISP) and is what external services typically see.

IPv6 availability can change how applications connect, so checking both IPv4 and IPv6 on Android can prevent surprises.

For local access (router/nearby devices), use Wi‑Fi IPv4
For websites/services, you may need different info (public IP)
Write down the value shown for your specific connection

To help you pick confidently, here’s a practical comparison of the IP values you might see on Android.

📊 DATA

IP Address Types You May See on Android Wi‑Fi (What to Use)

#	IP / Field	Common Format	Typical Use	Finding Ease on Android
1	Wi‑Fi IPv4 (local IP)	192.168.x.x / 10.x.x.x	LAN access, router admin, device discovery	★★★★☆
2	Wi‑Fi IPv6 (local/global)	2001:… or fd00:…	IPv6-enabled LAN apps & services	★★★☆☆
3	Gateway / Router IP	192.168.1.1 / 10.0.0.1	Internet routing, subnet boundary checks	★★★★☆
4	Subnet / Prefix length	255.255.255.0 or /64	Determines local vs routed traffic	★★★☆☆
5	Wi‑Fi Link‑local IPv6	fe80::/10	Local-only reachability, limited app use	★☆☆☆☆
6	Public IP (external)	203.0.113.x (example range)	Remote access & external DNS matching	★☆☆☆☆
7	Mobile Data IP (if applicable)	Often dynamic/private per carrier	Cellular diagnostics & connectivity	★★☆☆☆

You now know multiple ways to find your IP address on Android—starting with Wi‑Fi settings for the fastest local IP. Check your connected Wi‑Fi network details first, then use Advanced or Status if the values aren’t visible. If you tell me your Android brand/model and whether you need Wi‑Fi IPv4 or public IP, I can point you to the exact menu path for your device—and help you confirm you’re using the correct IP for the task you’re trying to complete.

Frequently Asked Questions

How do I find my IP address on Android using Settings?

Open the Settings app on your Android device and go to “Network & internet” (or “Wi‑Fi,” depending on your model). Tap your current Wi‑Fi network, then look for details like “IP address,” “IPv4 address,” or “Device IP.” You may need to scroll to a “Network details” or “Advanced” section to see the full IP address.

What is the fastest way to find the IP address on Android when I’m not connected to Wi‑Fi?

If you’re using mobile data, your IP may be shown under cellular network details rather than Wi‑Fi details. Go to Settings → “Network & internet” → “Mobile network” (or “SIM cards”) and check for “APN” or “Network details,” which sometimes includes an IP address. Keep in mind that mobile carrier networks often use private addresses or NAT, so the exact public IP can be different from what Android shows.

Which app should I use to check my Android IP address for troubleshooting?

For most users, a third-party app isn’t necessary because Android can display the IP address in Wi‑Fi network details. If you still need help, look for reputable network tools from well-known developers that clearly show “IPv4/IPv6,” gateway, and DNS servers. Always verify the app requests minimal permissions, since many “IP checker” apps can be unnecessary or clutter the device.

Why can’t I see an IP address on my Android Wi‑Fi network?

If your Android is connected but not fully getting an IP lease, the “IP address” field may be empty or show “Obtaining IP address.” Try toggling Wi‑Fi off and back on, forgetting the network and reconnecting, or restarting the phone to force a new DHCP request. You can also check if the router is using a different subnet or blocking devices via MAC filtering, which may prevent IP assignment.

Best ways to find your public IP address from Android (not just local IP)?

The “IP address” you see in Android Wi‑Fi details is usually your local (LAN) IP, not your public IP. To find your public IP, open a browser on Android and search “what is my IP” or visit a trusted IP lookup site. This will display your public IP as seen by the internet, which is often what you need for remote access, port forwarding, or troubleshooting from outside your home network.

📅 Last Updated: July 08, 2026 | Topic: how do i find ip address on android | Content verified for accuracy and freshness.