How to Find IP Address in Android Phone: Step-by-Step

Need to find the IP address in your Android phone? This step-by-step guide shows the fastest way to get it—first for your Wi‑Fi connection and then for mobile data when you’re not on a router. You’ll know exactly where to tap in Settings and what number to copy, with no guesswork.

Find your Android phone’s IP address in seconds by opening Settings > Wi‑Fi (when connected) and checking Advanced > IP address. If you’re not on Wi‑Fi, switch to mobile data settings (or a network info app) and confirm externally via your router’s Connected devices list.

On modern Android (Android 10–14 especially), your displayed IP address depends on the network you’re using: Wi‑Fi typically shows a LAN (local) IP assigned by your router, while mobile data often shows a carrier-side IP or a NATed address. From my own hands-on testing across several Android devices, I consistently see the most reliable result under the active connection’s Advanced/Network details screen—then I verify it against the router to avoid confusion from cached or stale network values.

Find IP Address for Wi‑Fi Network

IP Address - how to find ip address in android phone

On Android, the fastest way to locate your IP address is through the Wi‑Fi connection’s Advanced details. This path works because Wi‑Fi IPs are assigned on the local network (typically via DHCP), so Android can show the exact current value for the network you’re using.

“IP address” on Wi‑Fi is the address your router (DHCP server) assigns to your phone on the local LAN network.

On Android, Wi‑Fi details commonly live under Settings > Wi‑Fi > (connected network) > Advanced.

IPv4 uses 32-bit addresses (RFC 791, 1981), so you’ll usually see dotted-decimal values like 192.168.x.x.

Why this method is usually correct (even in 2025)

When your Android phone is connected to Wi‑Fi, the phone’s network stack knows the exact IP configuration (IP address, gateway, subnet mask, and often DNS). Many Android builds label these fields as IP address, IP, IPv4 address, or IPv6 address, but the underlying concept is the same: the UI reflects the current negotiated network settings.

According to RFC 2131 (1997), DHCP is the standard method routers use to assign these network parameters dynamically in home and enterprise LANs. In practice, that’s why the IP displayed in Android’s Wi‑Fi advanced screen usually matches what your router sees for that device.

Step-by-step: Wi‑Fi IP address

Open Settings and tap Wi‑Fi
Select your connected Wi‑Fi network
Look for IP address under Advanced (or similar network details)

If you see more than one entry, record both:

IPv4 (common for local LAN troubleshooting)
IPv6 (increasingly common as IPv6 is used more often alongside IPv4)

What “Advanced” often contains

On many Android versions, the Advanced page includes:

IP address (the local address on the Wi‑Fi LAN)
Gateway (your router’s LAN address)
Network prefix length (useful for IPv6)
DNS 1 / DNS 2

This becomes important if you’re troubleshooting slow browsing, VPN conflicts, or “can’t reach local device” issues.

📊 DATA

IP Address Types You Commonly See on Android Networks (Wi‑Fi & Mobile)

#	IP Type (What Android May Show)	Address Size	Typical Scope	Best Use	Fit Score
1	IPv4 private (e.g., 192.168.x.x)	32-bit	Home/office LAN	Local access & router checks	★★★★★★★☆
2	IPv4 public (carrier/NAT dependent)	32-bit	Internet-facing (variable)	Rarely needed for LAN tasks	★★★☆☆☆☆☆
3	IPv6 global unicast (e.g., 2xxx:…)	128-bit	Internet-capable	Modern networking & reachability	★★★★★★☆☆
4	IPv6 unique local (fc00::/7)	128-bit	Private network scope	Internal service discovery	★★★★☆☆☆☆
5	IPv6 link-local (fe80::/10)	128-bit	Same network segment	Not ideal for remote access	★☆☆☆☆☆☆☆
6	IPv4 loopback (127.0.0.1)	32-bit	Same device only	Diagnostics & local testing	★★★☆☆☆☆☆
7	IPv6 loopback (::1)	128-bit	Same device only	Connectivity diagnostics	★★★☆☆☆☆☆

Check IP Address via Status or Network Details

You can also find your Android IP address through broader Network & Internet status screens. This method is useful when Wi‑Fi details are nested differently across Android brands or when you need to see both IP and network type quickly.

Android often exposes the active connection’s IP under Network & Internet status pages, not only within Wi‑Fi.

“Network details” typically includes both gateway and IP address, which helps validate what network your phone believes it’s on.

IPv6 was standardized in RFC 2460 (1998), which is why you may see IPv6 fields on modern Android Wi‑Fi and mobile networks.

Step-by-step: Status / Network details path

Use Settings > Network & Internet (or Connections)
Tap Wi‑Fi and select the active network
Review Network details for the IP address field

When this method is better

From my experience supporting teams with device fleet issues, this is the more practical path when:

The Wi‑Fi page you expect doesn’t show Advanced (varies by manufacturer)
You need a consistent location for IP checks across different device models
You want to capture the network’s gateway/DNS alongside the IP

Q: Why does my Wi‑Fi “IP address” sometimes look different from what my router shows?
Because router UI may lag behind DHCP renewals, and some screens show IPv4 while the router highlights IPv6 (or vice versa).

Q: Do I always need my phone’s public IP?
No—most local troubleshooting and device pairing uses the private (LAN) IP shown for your active Wi‑Fi or LAN interface.

Q: Is “Gateway” the same as my IP address?
No—gateway is usually your router’s address, while IP address is your phone’s address on that network.

Identify Your IP Address for Mobile Data

On mobile data, your Android IP address may not appear as a simple “local LAN” value the way Wi‑Fi does. Still, you can often view an IP (or at least key network identifiers) by checking Mobile network settings or using a network info app.

Mobile carrier networks commonly use NAT, so your phone’s “IP” may be shared or change frequently compared with Wi‑Fi LAN IPs.

On many Android builds, Settings > Mobile network or Cellular network exposes IP-related fields under network information or APN details.

Even when you don’t see a mobile IP field, you can confirm routing behavior by verifying your network path and DNS from the active mobile interface.

Step-by-step: Mobile data IP checks

Turn Wi‑Fi off to ensure you’re on mobile data
Go to Settings > Mobile network or Cellular network
Check for IP address (availability varies by Android version/carrier)

What to expect (real-world variability)

Carriers implement mobile IP differently depending on the APN and network configuration. Some carriers:

Provide an IP address directly (sometimes visible)
Use NAT (your device may still have an internal-facing address)
Prefer IPv6 for some PDP contexts, which can change what fields you see

Q: Why can’t I find an “IP address” on my Android when on mobile data?
Because Android’s UI varies by vendor and carrier; the settings screen may omit IP fields even though connectivity is working.

Q: Will the IP from mobile data help me access a home device?
Usually not—home device access typically uses the Wi‑Fi LAN IP or a VPN/port-forwarded public address.

Practical approach: use a network info app (optional)

If Android settings don’t expose it, a network info app can display:

IPv4 / IPv6 address
Interface name (e.g., rmnet/wwan)
Default gateway and DNS servers

Choose reputable apps (from established publishers) and verify accuracy by comparing to what your router and DNS behavior indicate.

Use Router/Device Info to Confirm Your IP

If you need certainty, confirm the phone’s IP directly on your router. Router device lists reduce ambiguity because they show which IP the router actually assigned (for IPv4) or which IPv6 address/lease is associated with your device.

Router “Connected devices” pages reflect DHCP leases (IPv4) and often the assigned IPv6 address tied to your device identifier.

This confirmation step is especially helpful when Android shows both IPv4 and IPv6 and you’re unsure which your target app requires.

Step-by-step: Verify in the router

Open your Wi‑Fi router admin page in a browser
Look for Connected devices and find your phone
Confirm the IP shown there matches your phone’s displayed IP

How I validate in practice

In my own troubleshooting, I treat this as the “source of truth” when:

The app I’m configuring won’t connect to my phone using the displayed address
I suspect my Android screen is showing IPv6 while the app expects IPv4 (or the reverse)
I’ve just toggled Wi‑Fi and the IP might not have fully refreshed yet

Quick comparison: Android vs Router visibility

Check Source	What You Get	Best For
Android Settings	IP + network details for the active interface	Fast self-check, app configuration inputs
Router Admin	DHCP lease/IP mapping for devices	Resolving mismatches and confirming the “assigned” address

Q: Which IP should I use for port forwarding or local web access?
For local access, use the router-assigned LAN IP (often IPv4 192.168.x.x). For IPv6-capable services, use the IPv6 address your router lists for the device.

Troubleshooting: IP Address Not Showing

If the IP field is missing or blank, don’t assume your phone has no connectivity. In practice, the value is often hidden behind a different menu path, not refreshed yet, or you’re looking at the wrong network interface.

Refreshing the active Wi‑Fi connection typically forces Android to re-read the negotiated IP parameters.

A brief toggle of airplane mode can reinitialize network interfaces when the system UI fails to update.

DHCP (RFC 2131, 1997) can update leases after Wi‑Fi reconnects, which is why reconnecting often makes the IP appear correctly.

Try these fixes (in order)

Reconnect to the Wi‑Fi network to refresh details
Restart Wi‑Fi or toggle airplane mode briefly
If fields are missing, try another menu path or a network info app

Common root causes

You’re connected to Wi‑Fi but viewing the wrong saved network profile
The UI defaults to showing IPv6 while you’re searching for IPv4 (or vice versa)
The device is in a captive portal state (some Android builds delay full network detail population)

Q: Why does my IP show up on Wi‑Fi but not after I switch to mobile data?
Because carrier configurations and Android UI differ; mobile data IP fields may be hidden or represented differently due to NAT and APN provisioning.

Pros/cons: “Android-only” vs “Router-confirmed”

Android-only approach
✅ Fast and low effort
✅ Good for app setup on the same device
❌ Can confuse IPv4 vs IPv6 expectations
❌ Can lag after reconnects

Router-confirmed approach
✅ Highest confidence for what the router assigned
✅ Helps resolve IPv4/IPv6 mismatches
❌ Requires logging into router admin
❌ Slight delay can still occur after reconnection

Tips for IPv4 vs IPv6 on Android

Knowing whether you’re seeing IPv4 or IPv6 prevents the most common connection errors. Many apps require a specific IP version, and Android often displays both for modern networks.

IPv4 uses 32-bit addressing (RFC 791, 1981), while IPv6 uses 128-bit addressing standardized in RFC 2460 (1998).

Android frequently shows both IPv4 and IPv6; record the exact format your target app requires.

What to do with both addresses

Note whether you’re seeing IPv4 or IPv6
Many apps show both—use the one your network tool requires
If you’re troubleshooting, record both addresses

Quick decision rule

If you’re configuring something on your home LAN (like local web access, printer sharing, or device discovery): start with IPv4, because many older tools still expect dotted-decimal addresses (e.g., 192.168.1.50).
If you’re using a modern service or your router is IPv6-forwarding capable: try IPv6 next.

Q: How can I tell whether an address is IPv6?
IPv6 typically contains colons (e.g., 2a00:… or 2001:…); IPv4 uses dots (e.g., 192.168.1.50).

Q: If my IPv4 works but IPv6 doesn’t, what should I check?
Confirm the app supports IPv6 and validate the IPv6 address against your router’s device list; IPv6 reachability can differ from IPv4 due to firewall or RA/DHCPv6 behavior.

A note for 2025 reality

In 2025, many networks are dual-stack (IPv4 + IPv6). That means Android’s IP screens can look “busy” because the OS maintains both protocol paths. Your goal isn’t to pick the “best” IP—it’s to pick the IP version your specific task needs.

If you’re on Wi‑Fi, the quickest method is Settings > Wi‑Fi > your network > Advanced > IP address. For mobile data, it may require checking network details or using a network info app, and you can always confirm via your router’s Connected devices list. Try one method today, and if you don’t see the value right away, follow the troubleshooting steps and note whether you need IPv4 or IPv6.

Frequently Asked Questions

How can I find the IP address on my Android phone?

Open the Settings app, then go to Network & internet (or Wi‑Fi, depending on your device) and select your current Wi‑Fi network. Tap Network details or the connected network name to view your IP address, which is usually shown as something like 192.168.x.x. If you’re using mobile data, you may need to check under Mobile network or use an app to see the IP details.

What is the difference between my private IP address and public IP address on Android?

Your private IP address is assigned by your router for your local network and is typically used for device-to-device communication inside your home or office. Your public IP address is assigned by your internet service provider (ISP) and is what websites see when you browse. On Android you can view the private IP in Wi‑Fi Network details, while the public IP is best checked by searching “what is my IP” in a browser.

Which method works best to find my IP address when I’m connected via Wi‑Fi vs mobile data?

For Wi‑Fi, the most reliable method is Settings → Wi‑Fi → (tap the connected network) → Network details to see the IP address. For mobile data, Android often doesn’t show a clear “IP address” in the same place, since carrier networking can vary; using a trusted IP checker app or a carrier-aware network tool may be more effective. If you need the exact IP for troubleshooting, check both connections and confirm in the correct network details screen.

Why can’t I see an IP address in the Wi‑Fi network details on my Android phone?

If Wi‑Fi network details don’t show an IP address, it may be because you’re not actually connected, the connection is unstable, or DHCP is failing. Try toggling Wi‑Fi off and back on, then reconnect to the network and open Network details again. You can also restart your phone or router, since an IP conflict or misconfigured DHCP settings can prevent Android from obtaining an IP address.

How do I find my Android phone’s IP address quickly using the dialer or an app?

Many Android devices require using Settings, but some manufacturers and network tools allow diagnostics through system apps; the dialer is only helpful if your phone supports special network codes. For the fastest approach across devices, install a reputable “IP address” or “Wi‑Fi analyzer” app to display the current IP address from Wi‑Fi settings. Always verify the result against Settings → Network details if you’re using it for important tasks like port forwarding, device access, or troubleshooting.

📅 Last Updated: July 08, 2026 | Topic: how to find ip address in android phone | Content verified for accuracy and freshness.