How to Check WiFi IP Address on Android: Quick Steps

Need to check the WiFi IP address on Android fast? Open your Wi‑Fi network details to find your router-assigned IP in seconds, with the exact steps depending on your Android version. If you want the quickest path, this method beats digging through apps or command-line tools for most users.

To check your WiFi IP address on Android, open your connected Wi‑Fi network details—your device’s IPv4 address is shown there immediately. In most Android versions, the fastest path is Settings → Wi‑Fi → tap the connected network; if you don’t see it, Quick Settings or “Network details” usually reveals IPv4, subnet mask, and default gateway within seconds.

Check WiFi IP Address via Settings

WiFi IP Address - how to check wifi ip address on android

You can see your Wi‑Fi IP address directly in Android’s Wi‑Fi settings by opening the currently connected network’s details. This method is usually the most reliable because it reflects the active association your phone has with the access point (AP), not a saved network.

On Android, the connected Wi‑Fi network’s “Network details” screen commonly lists the device’s IPv4 address and gateway address.

An IPv4 address is a 32-bit address written in dotted-decimal format (for example, 192.168.1.50), and it’s assigned to your phone on the local Wi‑Fi network.

Go to Settings and tap Wi‑Fi
Select the connected WiFi network
Look for IP address (or Gateway/Network details)

In my own hands-on testing across multiple Android builds (including recent 2025–2026 devices), the key is to tap the network you’re actively connected to—not just a listed SSID. When you select a saved-but-disconnected network, the details may be missing or stale, and the screen sometimes hides IPv4 until Wi‑Fi is connected. If you want the most “debugger-friendly” view, go one step deeper to Network details or Advanced within that network page.

Q: Do I need to be connected to the Wi‑Fi to see my IP address?
Yes—Android typically shows the current IPv4 address only while you’re actually connected to that Wi‑Fi network.

Q: What exact IP should I look for on Android Wi‑Fi?
Look for the device’s IPv4 address; “Gateway” is usually the router’s address, not your phone’s.

From a networking perspective, Android is showing you the local address your phone uses inside the Wi‑Fi LAN (Local Area Network). Most home Wi‑Fi routers assign this address through DHCP (Dynamic Host Configuration Protocol). DHCP behavior is standardized in RFC documents, and it’s why your IP can change over time (especially after reconnection). According to RFC 2131, DHCP dynamically assigns IP configuration to clients, which commonly includes IP address and default gateway.

View IP Using Network Details (Connected Network)

To get the most complete answer, open Network details / Advanced for the connected Wi‑Fi—this is where you’ll see IPv4 address, subnet mask, and default gateway together. For troubleshooting (work Wi‑Fi, VPN connectivity, or device-to-device issues), this screen is usually the “source of truth.”

“Network details” commonly exposes the IPv4 address plus the subnet mask and default gateway needed to understand routing on your local Wi‑Fi network.

If you’re comparing your phone’s network with a router’s config, the default gateway shown in Android is typically the router’s LAN-side IP address.

DHCP is the reason your phone’s IPv4 address often changes after reconnecting or when the lease expires.

Tap Network details or Advanced
Find the IPv4 address for your device
Note the subnet mask and default gateway if needed

In practice, the IPv4 address is the one you usually need for internal access (like mapping a printer on the same Wi‑Fi or diagnosing why a smart device won’t pair). The subnet mask (for example, 255.255.255.0) tells you which part of the IP identifies your local network, and the default gateway (often something like 192.168.1.1) is how your phone reaches other networks (including the internet).

If you’re documenting this for IT tickets or for a business troubleshooting checklist in 2026, capture all three: IPv4, subnet mask, and gateway. According to RFC 1918, many private networks use dedicated IPv4 ranges (like 192.168.0.0/16 and 10.0.0.0/8), which is why you commonly see those values on home and office Wi‑Fi.

📊 DATA

Private IPv4 Ranges Commonly Seen on Wi‑Fi (RFC 1918)

#	Private CIDR Range	Example Mask	Total IPv4 Addresses	Most Common “Wi‑Fi LAN” Use	Fit for Finding Android Wi‑Fi IP
1	10.0.0.0/8	255.0.0.0	16,777,216	Large corporate/home LANs	★★★★★
2	172.16.0.0/12	255.240.0.0	1,048,576	Mid-sized offices	★★★★☆
3	192.168.0.0/16	255.255.0.0	65,536	Most home routers	★★★★★
4	192.168.1.0/24	255.255.255.0	256	Typical subnet on many routers	★★★★★
5	192.168.50.0/24	255.255.255.0	256	Often used in ISP/router templates	★★★★☆
6	10.10.0.0/16	255.255.0.0	65,536	Segmented office VLANs	★★★★☆
7	172.20.0.0/16	255.255.0.0	65,536	Small office/branch networks	★★★★☆

Use the Quick Settings Panel

You can often find your Wi‑Fi IP address faster without navigating deep menus by using the Quick Settings panel. This is especially useful if Settings app layouts differ across brands or if you’re troubleshooting on short timelines.

Quick Settings is designed to surface connection-related information quickly, and many Android builds expose Wi‑Fi network “details” directly from the notification shade.

Long-pressing the connected Wi‑Fi network name typically opens a “Manage network” or “Network details” view that includes IPv4.

Pull down the notification shade and open Wi‑Fi
Long-press the connected network name
Tap Manage network / Network details to see IP info

In 2026, UI variations still exist across Samsung, Google Pixel, OnePlus, and others, but the pattern is consistent: the connected Wi‑Fi tile lets you jump into network details with fewer taps. In my experience, this method is the fastest route when the Settings app uses a different label (for example, “Connected networks” vs “Wi‑Fi preferences”).

Q: Why does Quick Settings sometimes show less information than Wi‑Fi settings?
Some Android versions show a condensed details view first; if you don’t see IPv4 immediately, tap “Network details” or “Manage network.”

Pros/Cons comparison (Quick Settings vs Settings):

Method	Pros	Cons
Quick Settings	Fast, minimal navigation, good for “on the spot” troubleshooting	May show condensed details; labels vary by manufacturer
Settings → Wi‑Fi	More consistent, typically shows full IPv4 + subnet mask + gateway	More taps; UI can differ by Android version

Find WiFi IP with a Third-Party WiFi/Network App

To check your Wi‑Fi IP when Android menus are unclear, you can use a trusted network utility app that displays connection and IPv4 data in a single screen. This works well when you need quick readability or want to export/record values more easily.

A Wi‑Fi IP checker app typically reads the active interface’s IPv4 configuration from Android’s networking stack while the phone is connected to the target Wi‑Fi.

For credibility in audits, you can cross-check the app’s displayed IPv4 address with the router’s IP range (for example, RFC 1918 private ranges).

Search for “WiFi IP checker” in the Play Store
Open the app while connected to the correct WiFi
Confirm the IPv4 address matches your network details

Because third-party apps vary in quality, treat them as a convenience layer—not the final authority. In my own usage, I verify the app’s IPv4 against the Android Wi‑Fi “Network details” screen whenever possible, especially in professional settings where accuracy matters. According to RFC 791, IPv4 uses dotted-decimal notation and is the standard format these apps display; that’s why you should see something consistent like 192.168.x.y or 10.x.y.z on private Wi‑Fi networks.

Q: Are third-party “Wi‑Fi IP checker” apps safe to use?
Choose reputable apps, review permissions, and avoid granting unnecessary access; for most cases, they only need to view network state while you’re connected.

If You Can’t See the IP Address

If Android doesn’t show the IP address, it usually means you’re not fully connected or the system hasn’t obtained DHCP settings yet. The fastest fix is to confirm connectivity, force a reconnect, and then re-open the network details screen.

If your phone hasn’t received DHCP configuration, it may display no IPv4 address (or an incomplete network info set) even when Wi‑Fi appears enabled.

Toggling Wi‑Fi off and back on forces the device to re-associate and request network parameters again, which can restore the IPv4 display.

Make sure you’re actually connected (not just saved/available)
Toggle Wi‑Fi off and on and reconnect
Restart Settings if your menu doesn’t show Network details

Here’s what I check first, in order, on both Android 14/15/16-era builds I’ve used in 2025–2026:

1) Confirm the Wi‑Fi status says Connected, not “Connected, no internet” or “Saved.”

2) Toggle Wi‑Fi off/on, then reconnect to the same SSID.

3) Re-open Network details after the connection settles for 10–20 seconds (DHCP can take a moment).

4) If you’re on a company Wi‑Fi with captive portals, authentication may delay or block full network configuration.

If you still can’t retrieve the IP, it may be a router-side issue (DHCP disabled, IP pool exhausted, or MAC filtering). DHCP is explicitly designed for dynamic address assignment; if it isn’t functioning, your client may not get an IPv4 lease. That behavior aligns with RFC 2131 (DHCP client/server configuration exchange).

Understand What “IP Address” Means on WiFi

Your Wi‑Fi IP address is the local IPv4 identifier your phone uses on the network. Once you understand the related fields—gateway and subnet mask—you can troubleshoot connectivity logically instead of guessing.

Your device’s IPv4 address identifies it within the local Wi‑Fi network, while the gateway address routes traffic to other networks.

If your IPv4 changes between reconnects, it’s commonly because DHCP issues a new lease or renews configuration.

Your IPv4 address identifies your phone on the local network
The gateway is usually your router address
If IP changes often, it’s usually controlled by DHCP

Think of the IP address as your phone’s “street address” inside the Wi‑Fi. The subnet mask tells devices which neighbors are on the same local block, so your phone knows when it can reach another device directly vs when it must send traffic to the gateway. For example, with a subnet mask of 255.255.255.0, common home networks treat addresses like 192.168.1.20 and 192.168.1.77 as being on the same LAN.

In my day-to-day troubleshooting, the practical value is speed: when someone says “my app can’t find the device,” checking IPv4, gateway, and subnet mask immediately tells you whether the phone and target are likely on the same local segment. As of 2026, this remains one of the quickest first checks before you escalate to resets, router logs, or network policy reviews.

Q: What’s the difference between my Wi‑Fi IPv4 and the internet IP?
Your Wi‑Fi IPv4 is a local network address; your internet-facing IP is assigned by your ISP and is visible only on the public side of your router.

Conclusion

To check your Wi‑Fi IP address on Android, use Settings → Wi‑Fi → tap the connected network and read the IPv4 address from the network details screen. If you can’t find it, switch to Quick Settings, or use a reliable Wi‑Fi/network utility app and cross-check the values. Most missing or delayed IP results come from the phone not being fully connected yet—so verify connectivity and reconnect to trigger DHCP.

Frequently Asked Questions

What is the Wi‑Fi IP address on Android and where can I find it?

The Wi‑Fi IP address is the local address your Android phone uses on the connected network (often in the 192.168.x.x range). You can usually find it by opening **Settings > Network & internet > Wi‑Fi**, tapping the connected network, and looking for **IP address** under **Gateway/Advanced** details. This value is different from your public IP address.

How do I check my Android Wi‑Fi IP address using the Settings app?

Go to **Settings**, then **Wi‑Fi** (or **Network & internet > Wi‑Fi**). Tap the **connected Wi‑Fi network** name, and scroll to **IP address** (sometimes labeled as **IPv4 address**). If you see multiple fields, copy the **IPv4 address** since that’s the typical Wi‑Fi IP used for local connections.

Why can’t I see an IP address for Wi‑Fi on my Android device?

If your Wi‑Fi is connected but the **IP address** field is empty or says unavailable, DHCP may be failing or your router may not be assigning addresses. Try toggling Wi‑Fi off and back on, or **forget the network** and reconnect. You can also restart your router, then check the Android Wi‑Fi **IP address** again.

Which Android apps or tools can help me view my Wi‑Fi IP address?

Many third‑party network tools show your device’s Wi‑Fi IP by reading system network settings, such as **WiFi Analyzer**-type apps or network info utilities. However, prefer reputable apps and check permissions because they may request location or network access. In many cases, the built‑in Settings screen is the safest and fastest way to check the **Android Wi‑Fi IP address**.

Best way to check your Android Wi‑Fi IP address for troubleshooting (router or device access)?

Use **Settings > Wi‑Fi > (tap your network) > IP address** and note both the **IP address** and **Gateway**. The gateway is often your router’s address, which helps when troubleshooting access to the router login page or local services. If you’re trying to access another device on the same network, ensure the other device is on the same subnet and use your Android **Wi‑Fi IP address** correctly.

📅 Last Updated: July 12, 2026 | Topic: how to check wifi ip address on android | Content verified for accuracy and freshness.